MV Agusta F4 1000 R  태백 레이싱파크 주행사진입니다.

(사진은 모터바이크지의 윤정철기자님이 찍어주셨습니다.)


F4 1000 R Spec

ENGINE
Type Four cylinder, 4 stroke, 16 valve
Timing system “D.O.H.C”, radial valve
Total displacement 998 cm3 (60.8 cu. in.)
Compression ratio 13:1
Starting Electric
Bore x stroke 76 mm x 55 mm (3.0 in. x 2.2 in. )
Max. horse power - r.p.m. (at the crankshaft) 128 Kw (174 HP) at 11900 - Lim. 13000 r.p.m.
Max. torque - r.p.m. 111 Nm (11.3 Kgm) at 10000 r.p.m.
Cooling system Liquid cooled, water-oil heat exchanger
Engine management system “Weber Marelli” 5SM ignition - injection integrated system; induction discharge electronic ignition,“Multipoint” electronic injection

Clutch Wet, multi - disc

Gear Box Cassette gearbox; six speed, constant mesh
Primary drive 50/79
Gear ratio
First gear: Speed* 13/38 126,5 Km/h (78.5 mph) at 13000 r.p.m.
Second gear: Speed* 16/34 174,1 Km/h (108.1 mph) at 13000 r.p.m.
Third gear: Speed* 18/32 208,1 Km/h (129.2 mph) at 13000 r.p.m.
Fourth gear: Speed* 20/30 246,6 Km/h (153.1 mph) at 13000 r.p.m.
Fifth gear: Speed* 22/29 280,6 Km/h (174.2 mph) at 13000 r.p.m.
Sixth gear: Speed* 21/25 301,0 Km/h (187.0 mph) at 13000 r.p.m.
Final velocity ratio 15x40

ELECTRICAL EQUIPMENT
Voltage 12 V
Alternator 650 W at 5000 r.p.m.
Battery 12 V - 9 Ah

DIMENSIONS AND WEIGHT
Wheelbase 1408 mm (55.40 in.)
Overall lenght 2007 mm (79.01 in.)
Overall width 685 mm (26.97 in.)
Saddle height 810 mm (31.87 in.)
Min. ground clearance 130 mm (5.12 in.)
Trail 103,8 mm (4.08 in.)
Dry weight F4 1000 R: 192 Kg (423.3 lb) - F4 1000 R 1+1: 193 Kg (425.5 lb)
Fuel tank capacity 21 l (5.54 U.S. gal.) - reserve fuel: 4 l (1.05 U.S. gal. )

PERFORMANCE
Maximum speed* 301,0 Km/h (187.0 mph)

FRAME
Type CrMo Steel tubular trellis (TIG welded)
Rear swing arm pivot plates: material Aluminium alloy

FRONT SUSPENSION
Type “UPSIDE - DOWN” telescopic hydraulic fork with rebound-compression damping and spring preload adjustment
Rod dia. 50 mm (1.97 in.) with carbonitriding treatment
Travel on leg axis 129 mm (5.07 in.)

REAR SUSPENSION
Type Progressive, single shock absorber with rebound and compression (High speed / Low speed) damping and spring preload (hydraulic control)
Single sided swing arm: materiale Aluminium alloy
Wheel travel 120 mm (4.72 in.)

BRAKE
Front brake Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking band and aluminum flange
Front brake caliper Radial-type with 4 pistons - Ø 34 mm (Ø 1.34 in.)
Rear brake Single steel disc with Ø 210 mm (Ø 8.27 in.) diameter
Rear brake caliper With 4 pistons - Ø 25,4 mm (Ø 1.00 in.)

RIM
Front: Material / size Forged aluminium alloy 3.50 ” x 17 ”
Rear: Material / size Forged aluminium alloy 6.00 ” x 17 ”

TYRES
Front 120/70 - ZR 17 (58W)
Rear 190/55 - ZR 17 (75 W)

FAIRING
Material Thermoplastic
profile